Element Ti and Zr Influence TZM Alloy (1)
- Details
- Category: Molybdenum knowledge
- Published on 31 August 2015
- Written by yiping
- Hits: 459
Study found that the addition elements Ti and Zr will make TZM alloy density slightly less than molybdenum sintered body’s. This is due to the elements Ti and Zr are added in the form TiH2 and ZrH2, when sintered at 400 ~ 800 ℃ condition, the TiH2 and ZrH2 after dehydrogenation to generate hydrogen to increase the porosity of the material slightly. Although Ti and Zr slightly reduced the density of the TZM alloy’s sintered body, but refines the grain size of the sintered body. Mo grain size is generally between 10~20um and there are no second phase particles between grains, fewer voids. TZM alloy which added TiH2 and ZrH2 the grain size generally between 5~15um, comparing to molybdenum is small. Meanwhile, Mo grains which exist a large number of second-phase particles and pores and there are a large number of spherical particles and spherical pits. What’s more there is distribution uniformly.
By analyzing the TZM alloy spherical particles found that these particles are (Mo, Ti, Zr) xOy compound composite by Mo, Ti, Zr and O elements. (Mo, Ti, Zr) xOy alloy particles in favor of oxygen purification, generation of dislocation pinning effect, but, to refine the grain, thus contributing to improve the alloy strength.
More molybdenum product: http://www.molybdenum.com.cn
Tel: 0592-5129696 Tax：0592-5129797
E-mail:
This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com
sales@chinatungsten.com