Preparation of Mo-Cu material
- Details
- Category: Molybdenum knowledge
- Published on 09 July 2014
- Written by ling
- Hits: 316
Preparation of Mo-Cu material is substantially similar to tungsten copper materials, mainly through two ways: a mixture of copper infiltration method and sintering method.
(1) molybdenum copper material preparation - copper infiltration method
It is formed by direct compression of the molybdenum powder, sintered at a high temperature under argon into a porous preform of molybdenum, molybdenum and the sintered porous preform into the molten copper in a vacuum or under an inert gas. In order to obtain the desired copper material of copper content of molybdenum is necessary to control the porosity of the sintered molybdenum blanks, these pores reach into the copper content of the copper required. This method is very easy to obtain copper ≤ 30% (by mass) of molybdenum copper material, for ≥ 30% (mass fraction) of copper molybdenum copper material, copper powder can be mixed part of the molybdenum-copper mixed powder was pressed then sintered copper infiltration methods.
(2) Preparation of molybdenum-copper material - powder sintering method
It is required by the material composition of molybdenum copper molybdenum powder and copper powder mix, then press-molded, sintered directly into the product. Molybdenum oxide and mixed powder can also be a total reduction of copper oxide copper molybdenum been pressed and sintered powder mix, and the latter can be more compact organization more uniform product. High copper content of molybdenum copper material more suitable for mixing powder sintering process is simple and the same because it is a high density of available products, but also to further the use of complex pressure when necessary to increase density. Low copper content of molybdenum powder sintered copper material when mixed directly, you need to first be made of molybdenum-copper mixed powder or ultra-fine powder mechanically activated, thereby increasing its sintering activity, to ensure a dense sintered product.
More molybdenum product: http://www.molybdenum.com.cn
Tel: 0592-5129696 Fax：0592-5129797
E-mail:
This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Price: http://www.chinatungsten.com
sales@chinatungsten.com